Ferric Chloride solution

easy to use,low manufacture cost

Character:

(1)Its price is lower 40% or even more(same concentration) than solid ferric chloride,It can replace of solid ferric chloride completely.

 

(2) It can save the operation of preparing solution and dissolve incompletely problem.

 

(3) It can replace of other flocculants, such as liquid or solid aluminum sulfate, aluminium polychloride, polymerization ferrous sulfate, the handling cost will be reduced 30% or even more.

 

(4) Its flocculation function is good, and settling velocity is higher than aluminum series flocculant, such as aluminum sulfate, aluminium polychloride, ect., the formation of floc is closely.

(5) The amount of sludge generated is little, so can save the cost of handling sludge.

 

(6) Its applicable range of water PH is wild, pH4~pH12, and the best pH range is 6~10;

 

(7) it has remarkable function of precipitating heavy metal and sulfide, bleaching, deodorization, degreasing, sterilizing, dephosphorizing and decreasing the COD & BOD of effluent water.

 

Use:

Used in sewage treatment, pcb etching, stainless steel corrosion and mordant, it is a good sbstitute poduct to replace of solid ferric chloride, and it is a efficient and cheap flocculant which is used to handle the city wastewater and industrial sewage, it has remarkable function of precipitating heavy metal and sulfide, bleaching, deodorization, degreasing, sterilizing, dephosphorizing and decreasing the COD &BOD of effluent water.

 

Use-Method:

This product emphasises on handling industrial sewage. It can be added into the wastewater directly, and mixing steady with wastewater by strong mixing. Its general dosage is 0.01%~0.1% time of wastewater, however, the best dosage should be decided according to the different quality of real wastewater. The best using pH is 6~10, so it has better to adjust the pH to the scope of the requirements by lime or lye before using.

 

Package: packaged with plastic drum or tanker. 

 

Ferric Chloride solution